Basket

Contact Info

P.O.Box 301 Scarborough, Brisbane Qld 4020

Phone: 1800 TRIKES

Mobile: +61430008230

Web: Drift Trike Factory

DIY Motorized Drift Trike List of parts needed to Build your own Motorised Drift Trike

If your looking to build your own Big Wheel Motorized Drift trike then here is a short list of the Parts that you will need as a minimum.

  • 1 chromoly or steel drift trike Frame with plans
  • 1 engine plate to fix engine to
  • 1 set of engine mount bolts and nuts and washers
  • 1 set of weld on axle bearing hangers to fix axle to
  • 1 bracket to fix rear brake slave caliper to
  • 1 bracket to fix rear brake master cylinder and pedal to.
  • 26 x 4 Fat bike Wheel with axle spokes and tyre and tube
  • 26 x 4 Fat bike Forks 1/1/8th threadless
  • 1 set of handlebars
  • 1/18 bike stem steerer
  • 34mm id head tube
  • 34mm anodised bearing set
  • hydraulic front disc brake caliper to fit fat bikes
  • 6 x T25 screws for disc
  • 1 front wheel bike brake disc
  • 1 drift trike or go kart seat
  • 1 x 40mm axle kit with the following parts axle 2x hubs sprocket carrier brake disc carrier, disc and sprocket 420 pitch 2 bearings 2 bearing hangers ,4 keyways and all nut and bolt fixings
  • 1 420 pitch chain (DID)
  • 1 x 7hp stationary motor
  • 1 420 pitch 12 tooth Clutch ( dont skimp on the clutch as these wear out very easily)
  • 1 chain guard and fixings for chain guard to fix to engine and frame
  • 1 throttle set including twist throttle
  • 1 throttle cable
  • clutch fixing kit  with correct threaded 5/15 bolt to attach clutch to engine correctly
  • throttle cable mounting kit to fix throttle to engine
  • kill switch to cut engine
  • oil and petrol for engine
  • rear brake set with master cylinder and slave cylinder
  • brake hose
  • Custom Drift trike Pedal
  • Handlebar grips for footpegs
  • handlebar grips for handgrips
  • front brake lever
  • hose for front brakes
  • seat mounting kit including weld on brackets
  • chain adjusting bolts
  • chain adjusting weld on bracket
  • powder coating for the drift trike frame
  • zip ties to fix cables to the frame neatly
  • brake fixing screws for pedal//master
  • brake fixing screws for caliper
  • 1 set of rear wheels 11×7-10.5 (rim and tyre and sleeve)
Summary
DIY Motorized Drift Trike List of parts needed to Build your own Motorised Drift Trike
Article Name
DIY Motorized Drift Trike List of parts needed to Build your own Motorised Drift Trike
Description
This is a list of parts you will need to build your own motorized Drift trike from scratch
Author
Publisher Name
Drift Trike Factory
Publisher Logo
By | 2020-05-25T13:40:43+10:00 June 30th, 2017|Drift Trikes|Comments Off on DIY Motorized Drift Trike List of parts needed to Build your own Motorised Drift Trike

About the Author:

Managing Director Of Drift Trike Factory
Call Now Button